# Slide-Out Repair in Mission Viejo, CA

Canonical: https://theocrv.com/services/roof-slideout-awning/slide-out-repair/
Business: OCRV Center, Yorba Linda, CA. Serving Mission Viejo, California.
Phone: (949) 799-3387 | Email: info@ocrvcenter.com

Yes, OCRV Center repairs RV slide-outs at our in-shop Yorba Linda facility, a short drive up the 5 and 91 from Mission Viejo. We fix slide mechanisms, motors and gears, worn seals and gaskets, and the room structure itself so the slide extends, retracts, and seals correctly on motorhomes, fifth wheels, and trailers.


## What this includes
- Slide-out mechanism repair and adjustment
- Motor and gear replacement
- Rack, cable, and hydraulic system repair
- Seal and gasket replacement
- Slide room structural repair
- Alignment and travel adjustment
- Slide floor and support repair
- Water-intrusion inspection at the opening

## Who it is for
- Slide-outs that stick, grind, or will not move
- Rooms that leak air or water at the seals
- Motorhomes with a failed slide motor or gear
- Trailers with a sagging or misaligned slide room

## Pricing
Ballpark by mechanism, seal, and structural work, quoted in writing after an in-shop inspection.

## FAQ
### My slide-out will not move. Can you fix it?
Yes. A stuck slide usually traces to the motor, gears, cables, or hydraulics. We diagnose the mechanism, repair or replace the failed part, and adjust the travel so it moves smoothly.

### Can you replace the seals so my slide stops leaking?
Yes. Worn slide seals and gaskets let in air, water, and dust. We replace them and check the opening for damage so the room seals tight when closed.

### Do you repair the slide room structure, not just the mechanism?
Yes. We repair sagging floors, supports, and the room box itself when the structure is worn or water-damaged, then realign the slide.

### Why is my slide-out out of alignment?
Wear in the mechanism, a weak motor, or structural sag can throw the room off square. We correct the cause and readjust so it sits flush.